CALL FOR PAPERS
ISSM2012 online submission has been closed.
English(PDF: 192 KB)
Japanese(PDF: 267 KB)
Extention of ISSM 2012 Abstract Submission to Wednesday, June 13, 2012 (PDT 8:00AM)
(JST Thursday, June 14, 0:00AM)
Areas of Interest
Abstract will be accepted for each of following areas of interest. See reverse for further information.
Fab Management
- Factory Design & Automated Material Handling(FD)
- Manufacturing Strategy and Operation Management (MS)
- Manufacturing Control and Execution (MC)
- Environment, Safety and Health (ES)
Process Integration
- Process and Material Optimization (PO)
- Yield Enhancement Methodology (YE)
- Contamination Control and Ultraclean Technology (UC)
- Process Control and Monitoring (PC)
- Process and Metrology Equipment(PE)
- Design for Manufacturing (DM)
Final Manufacturing
- Final Manufacturing (FM)
Highlight Theme
Papers on the topics of special interests will be rearranged and will be programmed as a special session for highlight themes. Papers on the following topics are especially welcome. See information on the reverse side.
3DIC (TSV and all other 3D)
- 3D Integration Technology
- 3D Applications
- 3D Design and Test Methodology
Printed Electronics
- Organic transistor, Flexible device, Ink, Printing Coating, Laminating, Reliability evaluation etc.
- Thin film display, Touch screen sensor, Solar cell, electric paper etc.
Process Control Solution
- Process Control Algorithm and Tool Technologies
- Process Control Application Technologies
- Latest Control Technologies
Business Continuity Plan/Management (BCP/BCM)
- BCP/BCM on semiconductor manufacturers and it乫s support industries
- Earthquake resistant and absorbing technology for semiconductor manufacturer line
- Earthquake resistant and absorbing technology for equipment
- Product protection measure on Fab. automatic conveyance apparatus
- Earlier recovery method from disaster damage
Power Devices
- Performance Improvement Technology
- Break-through Technology
- SiC Manufacturing Technology
Recommendation for IEEE/ TSM
Best papers for ISSM will have the chance to submit full papers for IEEE/TSM (Transactions on Semiconductor Manufacturing) which is published quarterly for worldwide distribution. About ten papers are annually selected and reported in ISSM/TSM special session for the next year.
Additional details for the Areas of Interest and Highlight theme
Details for the Areas of Interest
Fab Management
FD: Factory Design & Automated Material Handling
This area focuses on fab design and its key enablers to meet the flexibility, extendibility, and scalability needs of a cost-effective leading-edge fab.
MS: Manufacturing Strategy and Operation Management
This area focuses on strategy and concepts for more functional fab, and its operation management to meet rapidly changing complex business requirements.
MC: Manufacturing Control and Execution
This area includes manufacturing execution and decision support systems, factory scheduling, control of equipment/materials handling systems and queue time management.
ES: Environment, Safety and Health
This area focuses on suppression of energy and materials consumption, recycling and reuse of materials from the standpoint of the environmental management in a semiconductor factory.
Process Integration
PO: Process and Material Optimization
This area focuses on process and material optimization from the standpoint of miniaturization, cost reduction and environment. The breakthrough technology to improve productivity is contained.
YE: Yield Enhancement Methodology
This area focuses on probe yield enhancement and its stabilization technology including inspection, analysis and reduction of defects and particles. Reports for the advanced 45nm process and 300mm wafer processes would be especially attractive.
UC: Contamination Control and Ultraclean Technology
This area focuses new technology on damage-less particle removal, contamination control of wafer backside and bevel, surface cleaning for new materials and fine structure. Energy saving cleaning and molecular level contamination control in advanced wafer fab will be included.
PC: Process Control and Monitoring
This area focuses on tighter process control for advanced production as well as mature fab, to achieve higher productivity, higher uptime, quality enhancement by advanced equipment control/advanced process control(AEC/APC), FDC, e-diagnostics and new sensors. This area also covers accuracy enhancement and smart process control using virtual metrology for 32 to 65nm nanoscale device manufacturing and excursion control for stable equipment operation.
PE: Process and Metrology Equipment
This area focuses on finer pattern delineation/control. The application of equipment engineering system will be highlighted.
DM: Design for Manufacturing
This area focuses in the collaboration between manufacturing and design including RET, OPC and systematic defects.
Final Manufacturing
FM: Final Manufacturing
This area focuses on "3D technology","Flip chip & fine pitch bump","Si interposer" and "Lead-free connection".
Details for the highlight theme
3DIC (TSV and all other 3D)
3DIC covers manufacturing, design, inspection and characteristics evaluation technologies related to all 3D integration topics, including 3D process technology, materials, equipment, design methodology and applications. Here, not only 3D using TSV, but also by packaging technology such as chip stacked ,PoP, epi-film bonding and 3D transistors by front end process will be discussed.
Topics may includes丗
3D Integration Technology.
Through Silicon Via (TSV), wafer thinning, wafer alignment, wafer bonding, wafer dicing, heterogeneous 3D integration , capacitive coupling, inductive coupling, multilevel epitaxial growth, CoC (Chip on Chip) , CoW (Chip on Wafer) , Epi-film bonding, 3D transistors and etc.
3D Applications.
Si interposer, Imaging, Memory, Processors, Communications, Network, Wireless, Biomedical, MEMS/NEMS and etc.
3D Design and Test Methodology.
3D CAD, 3D synthesis, 3D design flows, Signal and power integrity analysis, Design in 3D, 3D thermal design and analysis, Design for testing, 3D mechanical stress, Reliability design and analysis, Inspection in mass production, Failure analysis and etc.
Printed Electronics
Printed Electronics is expected to create new emerging industry due to its high productivity, energy saving and resource saving, which can produce large area flexible devices.Three main technologies , one is semiconductor, 2nd is printing and the last is materials, will be merged each other to manufacture new final applications. Here, manufacturing technologies and applications will be discussed.
Topics may includes丗
Technology.
Organic transistor , Flexible device, Ink , Printing (nano imprint, micro contact print, converting, screen printing, flexography, ink jet and etc.) Coating, Laminating, Reliability evaluation, Electric and mechanical evaluation and etc.
Applications.
Thin film display, Touch screen sensor, Solar cell, electric paper, flexible circuit board, organic EL light, organic memory device, RFID label, Antenna, medical sensor and etc.
Process Control Solution
Process control solution covers all process control technologies related to APC, AEC, FDC topics including algorithm and tool technologies, practical control application technologies, and latest control technologies.
Topics may include丗
Process Control Algorithm and Tool Technologies.
Feedback and feedforward control, LtL and WtW control, MVF, Kalman filter, and sampling method which are used in semiconductor manufacturing process, etc. Additionally, statistical methods and tools related to PCA, PLS, independent component analysis, and MT system, etc.
Process Control Application Technologies.
Lithography including resist coater, CMP, Dry etching including EPD monitor, Wet cleaning, Thermal processing (RTA, RTP, and furnace), Sputtering and chemical vapor deposition, and Ion implantation, etc.
Latest Control Technologies.
DFM cooperation, Virtual metrologies (VMs), VM cooperation control (VM-APC/FDC/SPC), inline/off line inspection cooperation, device characteristics control, and chip yield control, etc.
Business Continuity Plan/Management (BCP/BCM)
BCP/BCM is expected to discuss wildly with many firms and groups about BCP and BCM, after the taking hard opportunity on last year.
Topics may includes:
BCP/BCM on semiconductor manufacturers and it乫s support industries
Earthquake resistant and absorbing technology for semiconductor manufacturer line
Earthquake resistant and absorbing technology for equipment
Product protection measure on Fab. automatic conveyance apparatus
Earlier recovery method from disaster damage
Power Devices
Power devices covers manufacturing technologies related to rectifier diode, power MOFET, IGBT(Insulated Gate Bipolar Transistor), thyristor, GTO(Gate Turn-Off thyristor) and triac.
Topics may includes丗
Performance Improvement Technology.
Large current capacity, Response time, Miniaturization, Low power dissipation, Energy saving, Lower calorific value, Low gate control electric power, High ruggedness, etc.
Break-through Technology.
IEGT(Injection Enhanced Gate Transistor), Super junction, Floating Island MOS, Vacuum micro emitter(VME), Wide band-gap semiconductor, etc.
SiC Manufacturing Technology.
Large diameter SiC single-crystal, Monocrystalline SiC bulk crystal growth, High quality epitaxial growth, Micropipe defect, Low乚angle grain boundary, etc.